Question: When Should You Throw Away A Chainsaw Chain?

When should a chainsaw chain be replaced?

The signs that it’s time for chainsaw chain replacement#1 – Difficulty with positioning.

#2 – The chainsaw no longer pulls itself into the wood.

#3 – Smoking, even when lubrication is good and chain tension is correct.

#4 – Crooked cuts.

#5 – Missing or damaged teeth.

In Conclusion..

Can I throw away a chainsaw?

Throwing a chainsaw in the trash isn’t the best way to dispose of it. Most power tools that are considered eWaste or contain hazardous materials won’t be hauled away by your weekly trash company, but we haul them all away for a fair and honest price.

What is the most aggressive chainsaw chain?

Stihl chainStihl chain is a little more expensive but it’s the most aggressive chain commonly available. It’s also made from the hardest steel so it holds an edge better than any other brand I’ve tried (including Carlton, Saber and Bailey’s Woodsman Pro).

Why does my chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You’re rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

Is it worth sharpening a chainsaw chain?

The correct file to sharpen any given chain is worth less than five bucks. It will touch up a chain and keep it sharper than new literally a hundred times (assuming there is no physical damage to the chain). You can sharpen a chain until the little slash mark at the back of the tooth. It is, however, a learned skill.

What can I do with an old chain?

With that in mind, below are 20 ideas for reusing tire chains in other areas of your life.Make Chandeliers. To start, this site really shows how creative people can get with used items. … Hang a Tire Swing. … Make a Belt. … Make a Wallet Chain. … Make a Door Lock. … Create a Tie Out. … Make a Rain Chain. … Hang Décor Items.More items…•Mar 2, 2015

How much does it cost to sharpen a chainsaw?

HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.

What should you not do with a chainsaw?

Don’t ever run while carrying a chainsaw. Do try to avoid cutting with the blade tip, this will also help avoid kickback. Do try cut below shoulder height wherever possible. This will keep a chainsaw away from your face in the event of kickback.

How do I dispose of old hedge trimmers?

If your hedge trimmer is broken or unusable, it may be placed in the trash. Remove and properly dispose of batteries or motor oil first.

How do you know when a chainsaw chain is worn out?

The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.

What causes a chainsaw to throw a chain?

The drive sprocket is the mechanism that propels the saw blades on the chain around the bar. If the sprocket gets significantly worn down, it will be impossible to maintain proper chain tension, which will result in your chain saw throwing its chain.

How many times can a chainsaw chain be sharpened?

More Sharpening Tips Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape.

How tight should you tighten a chainsaw chain?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.

How do you fix a chainsaw chain?

Step 1: Remove the Old Chainsaw Chain. … Step 2: Release the Chain Tension. … Step 3: Remove the Old Chainsaw Chain. … Step 4: Loosen the Tensioning Screw. … Step 5: Thread the New Chain Onto the Saw. … Step 6: Align the Guide Bar. … Step 7: Replace the Side Plate. … Step 8: Tighten the Chain to the Correct Tension.More items…

Why won’t my chainsaw chain tighten?

If you can’t tighten the chain, you may not be implementing the proper tightening procedure. To adjust the chain, loosen the nuts that hold the guide bar in place. … Attempting to turn the tension screw without loosening the nuts first may be the reason you can’t tighten the chain.